HOW TO INSTALL A DOOR

Choosing the right door

The first step before knowing how to install a door is to choose the most suitable one for our home and needs. In this case we must review several aspects:

What function are we looking for?

We all want an ideal door that meets our needs, but we must keep in mind what function we want it to perform. It can be protection, decoration or simply because we have created a new room and we must put a door on it as a requirement.

Indoor or outdoor?

In addition to the function that we can look for, we have to verify that our choice meets the requirements and characteristics according to the space where they are going to be installed.

For example, the doors of the rooms will be of a different material and level of security than the entrance to the house.

for outdoors

If we are looking for an exterior door, we must check that it provides good security, insulation and is comfortable for daily use.

Regarding the material, it must offer high protection so that it becomes an impediment to those who wish to enter without permission. Those with a higher level of security are armored or armored, however, those made of metal, wood or PVC are favorite candidates.

for interiors

Here we must decide what we want to achieve according to the interior effect: separation of space, intimacy, letting in light, isolating sound or acclimatizing, among others.

In terms of materials, we do not have many options, since they are mostly made of wood because they manage to satisfy the needs of every home.

Does it match the space?

Now, it is necessary to evaluate if the door that we are going to choose combines with the style of our home. To do this, you can look at photos of interior design on the Internet and get an idea of ​​what colors or textures could combine better.

This applies to both interior and exterior doors, but it is up to your creativity and taste to make the best decision.

Budget

One of the fundamental factors when choosing any product is the budget that we have available. And as you will already be assuming, the doors of denser, finer materials and that provide greater security, will be the most expensive. It is your task to explore among the hundreds of options which one suits your needs and which you consider the best value for money

Prior Review and Required Materials

Now, going a little further towards the installation of ourdoor, we must consider 3 situations that can vary the materials that we will need during the process.

1. If the door hole is not found

In the event that we are facing a wall like a white canvas, it will be necessary to make the hole, so you must take the measurements of the door frame and begin to break said wall.

To achieve this, the necessary tools will depend on the material of the wall, since for wood you can use a circular saw and the cut would be fast, but if it is a brick wall, you will have to use a hammer and chisel.

2. If there is no frame installed

If you have opened the hole and now you need to install the frame, make sure that before purchasing said door, those who provide it tell you that your purchase includes its frame, so that you only have to take care of making the fit: an assembly of aluminum that will allow it to fit firmly to the wall. At this point you will need: nails, drill, rivets, screws and hammer.

3. If you are looking to change a door

Now, when it's just a matter of changing a door and we already have the frame installed, you will need the basic installation materials.

don't forget security

Although installing a door is a relatively simple process, we cannot rule out that just like in any other job, we can run the risk of injuries.

For this reason, it is necessary to use gloves, face masks and safety glasses, as well as clothing that allows movement and is not uncomfortable.

Let's do it!

Now yes, let's go with the process of how to install a door when we have already installed the frame:

What do you need?

bubble leveler

Screwdriver

Measuring tape

Wooden cribs 

Wood chisel 

Hammer 

Drill 

Pencil

Step 1. Measure the inside

The first thing we must do is measure the inside of the frame to know exactly the width and height of the door.

Step 2. Buy the door

It is time to buy the door, we recommend you go to a place where they cut you for free according to the measurements. At The MAS Home Improvement you will find a wide variety of options.

Step 3. Install the hinges

Once we have everything at home, we must start by installing the hinges on the frame. One in the middle, and another two that are 10-15 cm before each vertical edge. To install them correctly, first we make the necessary marks and with the help of a chisel we remove part of the wood so that our hinges do not protrude from the frame.

Step 4. Temporarily place the door

When the hinges are fastened, we provisionally place the door and adjust the height with the help of the wooden wedges. And with the pencil, we mark the height where the hinges should be on the door.

Step 5. Work on a flat surface

We remove the door and put it on a flat surface that allows us to work on it.

Step 6. Remove the bolts

We remove the pins from the hinges so that the hinges can be separated.

Step 7. Mark the outline of the hinges

Now, we must make the outline of the hinges on the edge of the door, taking into account the marks that we had made previously.

Step 8. Check the level

Again, with the help of the chisel and the hammer, we remove a little wood so that the hinge is at the level of the door.

Step 9. Install the hinge

We take care of installing the hinge with the help of the drill and screwdriver.

Step 10. Put the door in place

We put the door back in its place and with the wedges we adjust it so that the hinges can fit perfectly.

Step 11. Place the bolts

Finally, we install the bolts with the help of the hammer so that the hinges are attached and that's it, our door would be ready.

Final recommendations

Here we have some final recommendations and tips to ensure that the installation of your door is successful and you do not have any difficulties.

Perform the installation process with the help of someone

If you do the installation process alone, you can run some risks, both of having an accident and exposing yourself to the door falling and suffering some damage that affects its finishes. To avoid this, have a partner or someone to help you.

Don't rush

Keep calm and install the door patiently, doing things in a hurry can lead to mistakes. Therefore, double check the measurements you took and every time you position the door, use the bubble level to make sure it is not tilted.

Find a good place to buy the door

At The MAS Home Improvement we provide advice so that you can do the installation process yourself. Also, if you buy your door with us, you will know that you are buying a quality product with a guarantee.

The process may vary

Depending on the materials and type of door, the process may change, however you can consult everything in the same place where you buy it.

Now you know how to install a door go ahead and discover how easy and simple it is. Of course, follow the advice we have given you.  What are you waiting for to place yours and give a new finish to your home?